# Steady-state and Dynamic Response Simulation of a One-Dimensional Heated Rod using Orthogonal Collocation

• A. O. F. Williams Department of Chemical & Petroleum Engineering, University of Lagos, Akoka, Lagos
Keywords: Distributed parameter system; heat conduction system, orthogonal collocation, eigenvalues, open-loop simulations

### Abstract

This paper presents the steady-state and dynamic response simulation of a one-dimensional heat conduction system starting from the parabolic partial differential equation (PDE) modelling the system. The PDE modelling the system was lumped using the orthogonal collocation method which is a method of weighted residuals. Both the linear and nonlinear cases were considered. The simulation of the lumped linear dynamic system was carried out based on the computation of the state transition matrix and the corresponding integral. The simulation of the lumped nonlinear system was done by numerical integration using the Semi-Implicit Third-Order Runge-Kutta method. It was found that using only 3 to 4 collocation points produced excellent results (both steady-state and transient response), when compared with the analytical results for the linear case. For the linear system formulation, the approach can be used to develop a low-order lumped model suitable for use in control design based on, for example, the classical PID controller method. For linear variation of thermal conductivity with temperature, it is shown that there may be significant errors in the the system dynamic response between the linear and nonlinear formulations for the system over a wide temperature operating conditions.

### References

Cagler, H., M. Ozer and N. Cagler (2008), The Numerical Solutions of One-Dimensionl heat equation by using the third degree B-spline Functions, Chaos, Solitons, and Fractals, Vol. 38, pp. 1197- 1201.
Curtain, R. and Morris, K. (2009), Transfer functions of distributed parameter systems: A tutorial, Automatica, Vol. 45, no. 5, may 2009, pp. 1101-1116.
Finlayson, B. A. (1980), Nonlinear Analysis in Chemical Engineering, McGraw-Hill Book Company, New York.
Finlayson, B. A. (1972), The Method of Weighted Residuals and Variational Principles, Academic Press, New York.
Friedly, J. C. (1972), Dynamic Behaviour of Processes, Prentice-Hall, Englewood Cliffs, N. J.,
Georgakis, C., Aris, R., and Amundson, N. R. !977), Studies in the Control of Tubular Reactors - I. General Considerations, Chem. Eng. Sci., Vol. 32, pp. 1359-1369.
Gerald, C. F. (1978), Applied Numerical Analysis, 2nd ed., Addison-Wesley Publishing Company, Reading, Massachusetts.
Goh , J., A. Abd Majid, and Md Ismail, A. I., (2011). Numerical Method using cubic B-Spline for Heat and Wave Equation, Computers with Mathematics with Applications, Vol. 62, pp.4402-4498.
Gould, L. A. (1969), Chemical Process Control: Theory and Applications, AddisonWesley, Reading, Massachusetts..
Gvirtzman, Z. and Garfunkel, Z. (1996), Numerical solutions for the one-dimensional heat-conduction equation using a spreadsheet, Computers & Geosciences, vol. 22, No 10, pp. 1147-1138.
Holt, B. R., and Morari, M.(1985), Design of Resilient Processing Plants - VI. The Effects of Right-Half-Plane Zeros on Dynamic Resilience, Chem. Eng. Sci, Vol. 40, pp. 59-74. .
Khanna, R., and Seinfeld, J. H. (1982), Analysis of Multivariable Control Strategies on a Heat Conduction System, Int. J. Control, Vol. 36, No. 1, pp. 1-24.
Li, H. X. and Qi, C. (2010), Modeling of distributed parameter systems for applications - A synthesized review from time-space separation, Journal of Process Control, vol. 20, no. 8, 2010, pp. 891-901,
Luyben, W. L.(1990), Process Modeling, Simulation and Control for Chemical Engineers, Second edition, McGraw-Hill Book Company, New York.
Morari, M.(1983), Design of Resilient Processing Plants - III. A General Framework for the Assessment of Dynamic Resilience, Chem. Eng. Sci., Vol. 38, No. 11, pp. 1881-1898.
Prieto, L.A.B,., J. C. B. Prieto and Z. J. Oplatcova (2016), Modeling and Simulation of Heat Transfer in Conduction-Convection Systems, WSEAS Transactions on Heat and Mass Transfer, Vol. 11, pp. 373 - 127
Ray, W. H. (1981), Advanced Process Control, McGraw-Hill Book Company, New York.
Simon, L. and Loney, N. W. (2003), Mathematical Modeling and Process Control of Distributed
Parameter Systems: Case Study. The One-Dimensional Heated Rod, CHEMICAL ENGINEERING EDUCATION, vol. 37, no. 2, pp. 126131,.
Stephanopoulos, G. (1984), Chemical Process Control: An Introduction to Theory and Practice,
Prentice-Hall, Inc., Englewood Cliffs, New Jersey.
Taiwo, O., S. O. Momoh, and J. O. Apara. (1987), Orthogonal Collocation Methods for Solving the Extended surface Heat Transfer Problem: Problem formulation and Presentation of Basic Results, Journal of the Nig. Soc. Chem. Engrs., Vol. 6, No. 2, pp. 153-162.
Tohidi, E. (2015). Application of Chebyshev Collocation Method for Solving two Classes of non-classical Parabolic PDEs, Ain Shams Journal of Engineering Journal, 6, pp. 373-379.
Thirumaleshwa, M. (2013), Numerical Methods in Heat Conduction, 1st Edition, Bookboon.
Villadsen, J., and M. L. Michelsen (1978). Solution of differential equation models by polynomial approximation, Prentice-Hall Inc., Englewood Cliffs, N. J.
Wang, B-L, and Y. W. Mai (2005), Transient One-Dimensional Heat Conduction Problems Solved by Finite Element, International Journal of Mechanical Sciences, vol. 47, pp. 303 - 317.
Williams, A. O. F., and Adeniyi V. O. (1991), Modelling and Simulation of the Dynamics of Steam-heated Heat Exchangers Using Orthogonal Collocation, Modelling, Simulation & Control, B, Vol. 37, No. 3, pp. 1-24.
Williams, A. O. F., and Adeniyi, V. O. (2001).Development of Some Fortran 77 Programs for Linear System Analysis, NSE Technical Transactions, Vol. 36, No. 1, pp. 68-80.
Williams, A. O. F., and Adeniyi, V. O. (2018). Dynamic Analysis and Transient Response Simulation of a One Dimensional Heated Rod using Orthogonal Collocation, paper presented at the Nigerian Society of Chemical Engineers 48th Annual Conference Abeokuta, Nigeria, 8th-10th November.
Young , L. C. (2019), Orthogonal Collocation Revisited, Compt. Methods. Appl Mech & Eng, Vol. 345, pp. 1033-1076.
Published
2020-02-09
How to Cite
Williams, A. O. F., & Adeniyi, V. O. (2020). Steady-state and Dynamic Response Simulation of a One-Dimensional Heated Rod using Orthogonal Collocation. Journal of Engineering Research, 24(2), 40-58. Retrieved from http://jer.unilag.edu.ng/article/view/577
Section
Articles